wp55cd7202.png
wp1b7ef4f0.gif

Site owned and operated by Morley Swimming Pools, 4 Peel Road, Springfield, Chelmsford, Essex.  CM2 6AQ

Copyright 2008 © Morley Swimming Pools

Morley Swimming Pools

 

Buy Online or Call Our Order Line Today

01245 252736

Home Heating Gas Heaters Oil Boilers Electric Heaters by Elecro Heat Pumps Heat Exchangers

Elecro Swimming Pool Heat Pumps The Ultra Efficient Way To Heat Your Pool

Elecro heat pumps are the most efficient and reliable swimming pool heat pumps available. Built to the highest possible standards Elecro heat pumps absorb heat from the air and transfer it to the pool water - making the heating process clean, efficient, ecological and most of all cost effective.

All Elecro heat pumps feature state of the art technology and are built using the highest quality components to ensure ultimate performance and reliability.

Key Features

Titanium Heat Exchanger - Total protection against corrosion, full-flow no by-pass required. Zero corrosion defect 10-year guarantee. Scroll Compressor - Efficient, reliable and silent. Whisper Quiet Fan - Low speed, tuned for maximum airflow and minimum noise. Largest Evaporator - Enables higher performance. Epoxy coated for protection against corrosion. Digital Control - State of the art, easily programmable with full diagnostic display

All Elecro heat pumps are fully supported by Elecro with 3-year parts & labour guarantee

Technical Specifications

On-Line Instruction Manual

How Do Swimming Pool Heat Pumps Work?

Product Code

Description

RRP

OUR PRICE

EHP40

40K BTU (12-kw) Titanium Heat Pump With Scroll Compressor

£3,185.50

£2,823.00

 

 

 

 

EHP49

49K BTU (14-kw) Titanium Heat Pump With Scroll Compressor

£3,685.75

£3,205.00

EHP49RC

49K BTU (14-kw) Reverse Cycle Titanium Heat Pump With Scroll Compressor

£4,030.75

£3,505.00

EHP65

65K BTU (19-kw) Titanium Heat Pump With Scroll Compressor

£3,984.75

£3,465.00

EHP65RC

65K BTU (19-kw) Reverse Cycle Titanium Heat Pump With Scroll Compressor

£4,329.75

£3,765.00

EHP100

100K BTU (29-kw) Titanium Heat Pump With Scroll Compressor

£4,536.75

£3,945.00

EHP100RC

100K BTU (29-kw) Reverse Cycle Titanium Heat Pump With Scroll Compressor

£4,881.75

£4,245.00

Description

RRP

Pool Smart Digital Heating Controller With T Piece, Flow Switch & Temperature Sensing Probe

£257.60

Competition Heat Pumps

CA Range

RA Range

Code

Output

BTU

Price

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Code

Output

BTU

Price

1209-N

9 KW

30,000

£1,370.00

1210-N

15 KW

50,000

£2,330.00

1224-N

23 KW

80,000

£3,390.00

1226-N

30 KW

100,000

£3,650.00

 

 

 

 

 

 

 

 

1227-N

9 - 15 KW

 

£190.00

1228-N

23 - 30 KW

 

£240.00

Competition (CA range 15 KW, 23 KW & 30 KW)Outdoor installation only

Competition (RA range 9 KW, 15 KW Outdoor / Indoor )

RA Through Wall Ducting Kit

Normally, heat pumps are sold for use in the summer season only. Yes, all the manufacturers including Competition state that they will work in ambient temperatures from 0-5 deg but will have minimal heat output, and realistically, at these temperatures you will be unlikely want to be swimming. Ideally, a heat pump should not be switched on until the ambient air temperature has reached 15-20 deg.C

Heat pumps are ideally suited for heating your pool in the summer season only (May – September). However, with various climate changes that we have been experiencing in recent years, we have had reports from our customers that they have been running their heat pumps from April to late October!

Unfortunately, sizing the heat for your swimming pool is not an exact science due to so many variables such as the thermal value of the pool structure, wind speed, water velocity, water table etc and if a heat retention cover has been applied.

Therefore, Competition base their calculations on the amount of heat (kW) your pool is likely to lose on an hourly basis. You will see that on some pool sizes we recommend two sizes of heater. If your budget allows, it is desirable to buy the larger size, due to it being more cost effective, efficient thus resulting is a quicker heat up time.

The sizing chart below assumes the following:-

• 15 deg C / 59F ambient air temperature (Realistic for start of season)

• Average wind speed 2.5 metres per second

• Desired water temperature 30 deg c / 86 F

• Average pool depth 1.5m / 5 ft

• No water table surrounding pool structure

• Minimum running time 10 hours per day

 

Costing half the price of other leading manufactures (without compromising on quality) the CA range offers a Titanium Heat Exchanger, Scroll Compressor as standard ensuring that you receive many years of reliable service. Using such high quality parts enables Competition to offer exceptional warranty terms that we believe are unmatched within the industry!

The RA model consists of the same integral parts but has the circulation fan mounted on the side, therefore extracting and exhausting the air from the sides. Where an outdoor installation is not possible the RA model can be adapted and installed in an indoor environment. The RA model can be installed indoors providing that adequate ventilation is available. Heat pumps are designed to be in an outdoor environment so there may be a chance that you will loose a small percentage of efficiency. All RA models have a steel coated housing.

Length ft

Width ft

Approx Gallons

Length M

Width M

Approx Litres

Minimum size heater required KW

Optimum size heater required KW

24

12

8550

7.32

3.66

38868

9

15

26

13

10034

7.92

3.96

45616

9

15

28

14

11638

8.53

4.27

52904

15

15

30

14

12469

9.14

4.27

56683

15

23

30

15

13359

9.14

4.57

60732

15

23

32

16

15200

9.75

4.88

69099

23

30

36

18

19238

10.97

5.49

87454

23

30

40

20

23750

12.19

6.10

107968

30

30

POOL SIZE